

Hallway hole patch
Fort LauderdaleA doorknob-sized hole in a hallway wall, cut back to solid board, patched, floated, sanded, and repainted in the existing wall color.
Handyman in Broward · Drywall Repair
Holes, cracks, water-damaged ceilings, and rough walls repaired and blended by Dr. Handyman Service technicians across Fort Lauderdale, Hollywood, Pembroke Pines, and the rest of Broward.

This companion site covers drywall work only. For other trades, visit the main Handyman in Broward website.
Doorknob punctures, furniture dents, and accidental holes patched, sanded, and blended so the wall reads flat again.
Cut out soft, stained drywall from roof leaks, A/C condensation, or plumbing failures and rebuild the section with new board.
Sagging ceiling seams, popped screws, and stained ceiling panels repaired and re-finished to match the surrounding surface.
Recurring corner cracks and lifting joint tape re-taped, floated, and feathered to reduce reappearance.
Knockdown, orange peel, smooth level-5, and popcorn-adjacent ceiling textures matched to the existing finish as closely as possible.
Skim coating rough or dated wall surfaces to a smooth, paint-ready finish across rooms or single accent walls.
Openings left by plumbers, electricians, or A/C techs closed, taped, and finished so paint is the only step left.
Framed and finished drywall for closed-in doorways, niches, soffits, and pass-through openings in Broward homes and condos.
Open the Assistant, describe the damage, add photos if you have them, and share the property address in Broward.
The Assistant collects contact and job details and checks live calendar availability before anything is confirmed.
Your request routes through our central Reception and Dispatcher team, who confirm the visit window with you.
The technician protects the space, repairs the drywall, matches texture where possible, and cleans up before leaving.
Representative examples of the drywall repairs we perform in Broward homes and condos.


A doorknob-sized hole in a hallway wall, cut back to solid board, patched, floated, sanded, and repainted in the existing wall color.


Stained, softened ceiling drywall from an air handler leak removed and replaced, then re-textured and painted after the leak was corrected.


Lifting joint tape at a wall-to-ceiling corner removed, re-taped, floated in coats, and finished flat.


Open drywall access left after plumbing work: new board fitted to the studs, taped, floated, and finished paint-ready.


Heavily textured wall knocked down and skim coated to a smooth, paint-ready surface across the room.
Start with the Assistant and our Broward dispatch team will take it from there.